EasyManuals Logo

Foscam C1 User Manual

Foscam C1
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
23
: FOSCAM LOGO
: Path to surveillance window. Click this button to go back to the surveillance window
: Path to Administrator Control Panel, Click it, to go to Administrator Control Panel and do
advanced settings.
: Click this button to go back to the Playback panel to view the stored audio files
stored in the SD Card.
Section 2 Multi-Device Window
The firmware inside the camera supports up to 9 cameras being monitored at the same time. You can
add other cameras in multi-device setting.
Section 3 Mode/ Stream / HDR / Mirror/ Flip buttons / Zoom
Mode
1) 50HZ ---------Indoor surveillance (Region: Europe, China)
2) 60HZ ---------Indoor surveillance (Region: USA, Canada)
3) Outdoor------Outdoor surveillance
Stream
The default stream supports multiple modes, For example: HD Mode/720P/23fps/2M meanings: Stream
type / Resolution / Maximum frame rate/ Bit rate. (Different models support different specific mode. )
Stream type : It is used to identify the stream type.
Resolution
The bigger the resolution, the better of the image quality is. If you are accessing the camera via
internet and want to get more fluent video streaming, please select resolution VGA.
Maximum frame rate
You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15,
you can achieve fluently video. The maximum frame rate for each model is different, please see the
“Specifications”.
Bit rate
Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate
configuration should combine well with the network bandwidth. When the bandwidth is very narrow,
and bit rate is large, that will lead to video can not play well.
You can reset the stream type on Settings-> Video-> Video Settings panel.
After changing, please reboot the camera and you can see the modification.
HDR(Only R2)
HDR stands for High Dynamic Range. It usually refers to the method of capturing images having

Other manuals for Foscam C1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foscam C1 and is the answer not in the manual?

Foscam C1 Specifications

General IconGeneral
TypeIP security camera
Placement supportedIndoor
Connectivity technologyWired & Wireless
Form factor-
Mounting typeDesk/Ceiling
Product colorBlack
Maximum resolution1280 x 720 pixels
Video formats supportedH.264
Minimum illumination0 lx
Sensor typeCMOS
Optical sensor size1/4 \
Motion sensorYes
Built-in HDDNo
Compatible memory cardsMicroSD (TransFlash)
Night vision distance8 m
Wi-Fi standards802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11d, IEEE 802.11g, IEEE 802.11n
Ethernet interface typeFast Ethernet
Ethernet LAN (RJ-45) ports1
Power consumption (typical)3 W
Sustainability certificatesRoHS
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)20 - 85 %
Weight and Dimensions IconWeight and Dimensions
Depth120 mm
Width70 mm
Weight170 g

Related product manuals