Foscam FN7108W-B4-1T - Page 10

NVR User Manual
www.foscam.com
2
will have an alarm flag alert that triggers an alarm and alarm logging will be enabled.
Note
When NVR system time and IPC time are different, the NVR recording will based on the NVR
system time.
Playback
You can play recording video files stored in the Hard disk. Recording includes schedule recording,
manual recording, motion recording and alarm recording. Single-screen playback, four screens or nine
screens synchronous playback are supported.
Alarm
Motion Detection Alarm
You can configure motion detection information about the corresponding channel in the NVR system.
When an object moves in the detection time segment and detection area, an alarm is triggered, the NVR
system enables motion detection recording, sends pictures to your mailbox.
Manage
You can search for IPC devices in the LAN through the NVR and add IPC devices to the NVR channel.
Through the NVR, you can also manage IPC devices.
HDD Management
When the HDD becomes exceptional (for example, HDD Loss, HDD Full, and HDD Error), the NVR
buzzer sounds an alarm.
When the HDD is full, you can select the cycle cover the earliest recording or stop recording.
Note
Only FN7108W-B4-1T kit has a 1T hard drive installed at the factory.
Other Functions

Support the logging function.
 Support local GUI output and perform shortcut operations through the mouse (left click to select,
right click to return to the previous menu).
 Three roles can access the NVR, which are respectively visitor, operator, and administrator. The