Foxconn H67MP series - Main

3
22
Main
► System Date
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use[ENTER],[TAB]or[SHIFT-TAB]toselectaeld.Use[+]or[-]toinputthevalue.
► System Time
Thisitemallowsyoutocongurethedesiredtime.Use[ENTER],[TAB]or[SHIFT-TAB]to
selectaeld.Use[+]or[-]toinputthevalue.
Thethreeeldsofthesettingare<hour>:<minute>:<second>respectively.
► Access Level
It displays your current access level. If you enter system with a user password, it will dispaly
“User”. If no password is set or you enter system with administrator password, this item will
dispaly “Administrator”.
► Model Name
This item shows the model name of this product.model name of this product.
► ME Version
It displays the current ME version.
► BIOS Version
ItdisplaysthecurrentBIOSversion.Usercancheckthisinformationanddiscusswiththeeld
service people if a BIOS upgrade is needed.
► Build Date and Time
This item shows the BIOS building date and time.
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors]: All errors can result in system halt.
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset Boot Power Health Security Save & Exit
System �ateSystem �ate [Tue 10/28/2010]
System Time [09:09:21]
Access Level Administrator
Model Name H67MP-S/-V/H67MP
ME Version N/A
BIOS Version A4BF1014
Build �ate and Time 10/27/2010 16:17:27
Halt On [All, but keyboard]
CPU Brand Name: CPU Brand Name:CPU Brand Name:
Genuine Intel(R) CPU 0 @ 2.40GHz
Total Memory 1024 MB (��R3 1333)
MAC Address 90-FB-A6-30-0�-B�
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized �efaults
F4: Save & Exit
ESC: Exit
Set the �ate. Use Tab to
switch between �ate elements.
Main