Foxconn H67MP series - Onboard Device Configuration

3
29
► All USB Devices
This item is used to enable or disable the support for USB devices.
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to enabled.
[Enabled]: This option will enable the legacy USB support.
[Disabled]: This option will keep USB devices available only for EFI applications.
[Auto]: This option will disable the legacy support if no USB devices are connected.
Onboard Device Conguration
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Onboard �evice Configuration
Onboard LAN Controller [Enabled]
Onboard LAN PXE OpROM [�isabled]
NEC USB 3.0 Controller [Enabled]
Audio Configuration
Azalia H� Audio [Enabled]
▶ Super IO Configuration
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized �efaults
F4: Save & Exit
ESC: Exit
Advanced
► Onboard LAN Controller
This item is used to enable or disable the onboard LAN controller.
► Onboard LAN PXE OpROM
This item is used to enable or disable onboard LAN boot option ROM.
► NEC USB 3.0 Controller
ThisitemisusedtoenableordisabletheUSB3.0controller.
► Azalia HD Audio
This item is enable oe disable the Azalia HD audio.
► Super IO Conguration
Press <Enter> to go to its submenu.