Foxconn H67MP series - Super Io Configuration; Serial Port; Parallel Port

3
30
Super IO Conguration
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Super IO Configuration
Super IO Chip IT8728
Serial Port 0 Configuration
Serial Port [Enabled]
�evice Settings IO=3F8h; IRQ=4;
Change Settings [Auto]
�evice Mode [Standard Serial Po...]
Parallel Port Configuration
Parallel Port [Enabled]
�evice Settings IO=378h; IRQ=5;
Change Settings [Auto]
�evice Mode [Standard Parallel...]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized �efaults
F4: Save & Exit
ESC: Exit
Enable or �isable Serial Port
(COM)
Advanced
► Serial Port
This item is used to enable or disable the serial port (COM).
► Device Settings
This item shows the resource assigned to the serial port.
► Change Settings
This item is used to select an optimal settings for the serial port.
► Device Mode
This item is used to change the serial port mode.
► Parallel Port
This item is used to enable or disable the parallel port.
► Device Settings
This item shows the resource assigned to the parallel port.
► Change Settings
This item is used to select an optimal settings for the parallel port.
► Device Mode
This item is used to change the parallel port mode.