To Next Page

To Previous Page

4.Itthengoesto“Disks”item.Press<Enter>todisplaytheharddiskslistforthisRAID0

second volume system.

5.Fromtheharddisklist,selectthepreviouslyconguredRAID0harddisks,andpress

<Space> key to select them. Two signs will appear to indicate the selections. Press

<Enter> to continue.

Intel(R)MatrixStorageManageroptionROMv5.0.0.1011ICH9RwRAID5

Copyright(C)2003-04IntelCorporationAllRightsReserved.

Intel(R)RapidStorageTechnology-OptionROM-10.0.0.1032

Name:

RAID Level:

TryRAID0-1

RAID0(Stripe)

Port Drive Model Serial # Size Status

0 Hitachi HDS721616PLAHitachi HDS721616PLA

PVF904�21G2J�M 149.0GB Non-RAIDDisk

ST380811AS

5PS1TAGW 74.5GB Non-RAID Disk Non-RAID DiskNon-RAID Disk

SAMSUNG HD161HJ

 S0V3J9APA30524 149.0GB Member DiskS0V3J9APA30524 149.0GB Member Disk 149.0GB Member Disk Member DiskMember Disk

ST380815AS

5RW1CA37

 74.5GB Non-RAID Disk Non-RAID Disk

Select 2 to 6 disks to use in creating the volume.

[↑↓]-Prev/Next[SPACE]-SelectDisk[ENTER]-Done

[ SELECT DISKS ]

0 HitachiHDS721616PLAPVF904�21G2J�M 149.0GBMemberDisk

[ CREATE VOLUME MENU ]

[↑↓]-Change[TAB]-Next[ESC]-PreviousMenu[ENTER]-Select