Foxconn H67MP series - Page 98

5
91
3. After <DEL> key is pressed, the screen appears as below:
Press<Y>keytoconrmthevolumedeletion.
4.ReturntoMainMenu.
Intel(R)MatrixStorageManageroptionROMv5.0.0.1011ICH9RwRAID5
Copyright(C)2003-04IntelCorporationAllRightsReserved.
Name Level Drives Capacity Status Bootable
TryRAID0 ID0(Stripe)2 465.8GB Normal Yes
Deleting a volume will reset the disks to non-RAID.
WARNING: ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)
[↑↓]-Select[ESC]-PreviousMenu[DEL]-DeleteVolume
Intel(R)RapidStorageTechnology-OptionROM-10.0.0.1032
Copyright(C)2003-10IntelCorporation.AllRightsReserved.
[ HELP ]
[ DELETE VOLUME MENU ]
TryRAID5 RAID5(Parity)3 149.1GB NormalYes
ALL DATA ON SELECTED DISKS WILL BE LOST!
(This does not apply to Recovery volumes)
Areyousureyouwanttodelete"TryRAID5"?(Y/N):
[ DELETE VOLUME VERIFICATION ]
Intel(R)MatrixStorageManageroptionROMv5.0.0.1011ICH9RwRAID5
Copyright(C)2003-04IntelCorporationAllRightsReserved.
1. Create RAID Volume 3. Reset Disks to Non-RAID
   4.RecoverVolumeOptions
5.Exit
RAID Volume :
None defined.None defined.
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
 0 Hitachi HDS72161 PVF904�21G2J�M 149.0GBHitachiHDS72161 PVF904�21G2J�M 149.0GB PVF904�21G2J�M 149.0GB Non-RAID Disk
1 ST380811AS 5PS1TAGW 74.5GB Non-RAID Disk
2 SAMSUNG HD161HJ  S0V3J9APA30524 149.0GBS0V3J9APA30524 149.0GB 149.0GB Non-RAID Disk
3 ST380815AS 5RW1CA37  74.5GB Non-RAID Disk
Intel(R)RapidStorageTechnology-OptionROM-10.0.0.1032
Copyright(C)2003-10IntelCorporation.AllRightsReserved.
[ DISK/VOLUME INFORMATION ]
[ MAIN MENU ]
2. Delete RAID Volume
[↑↓]-Select[ESC]-Exit[ENTER]-SelectMenu