3
41
► Memory Voltage Control
This item is used to adjust memory voltage. The maximum voltage of available adjustment
is “2.794V”.
Adjusting the voltage beyond the memory default voltage could result in damage to
memory.
The DDR3 default volatge is “1.5V”.
► NB Voltage Control
This item is used to adjust North Bridge(NB) voltage. The maximum voltage of available
adjustment is “1.936V”.
Adjusting the voltage beyond the NB default voltage could result in damage
to NB.
The NB default volatge is “1.10V”.
► VCore/Target VCore Voltage/VTT/Target VTT Voltage
These items show the current voltage values of VCore/Target VCoreVoltage/VTT/Target VTT Voltage.
To Next Page
Loading...
