FPG Inline GN Series - Cleaning; Cautions; Power; Water

Part No.21967 Rev. M June 2017 - 16 - Refrigerated Well GN Series
CLEANING
Cautions
GN SERIES REFRIGERATED WELL - CLEANING
Power
ALWAYS TURN THE POWER SUPPLY OFF BEFORE CLEANING.
Water
Unless the well is connected to a drain, do not use a lot of water to clean the
inside.
Exterior
GN SERIES REFRIGERATED WELL - CLEANING
Metal Surfaces
Stainless steel surfaces should be cleaned with hot soapy water or a good
quality metal cleaning compound.
DO NOT use abrasive pads or cleaners, as surfaces will be damaged.
Glass
(Optional Hood)
All glass should be cleaned using a good quality glass cleaner and a clean
cloth.
DO NOT use abrasive pads or cleaners, because they will damage the surface
of the glass.
Louvers
Use a vacuum cleaner to remove dust and fluff from all of the ventilation
louvers.
This will maintain the refrigeration efficiency, and prevent overheating.