Part No.21967 Rev. M June 2017 - 20 - Refrigerated Well GN Series
Cleaning Routines
GN SERIES REFRIGERATED WELL
-
CLEANING
Regular cleaning schedules are required to maintain optimum performance.
Failure to carry out routine cleaning/servicing schedules will void the warranty on
the refrigeration equipment.
Use a vacuum cleaner to keep all ventilation
louvers, in the joinery and the well base
assembly, free of dust and fluff.
For efficient refrigeration performance, the condenser
radiator must be kept clean, (see Servicing, Condenser
Radiator).
Regular vacuuming will prevent a build up of dust and fluff,
but the fins must be cleaned with compressed air during
scheduled servicing by a refrigeration engineer.
As part of the cleaning routine, the controls, mechanical parts and electrical
wiring should be inspected for damage, deterioration or need of adjustment.
If any small faults are found, have them attended to promptly by a competent
serviceman. Don’t wait until they cause a complete breakdown.
To Next Page
Loading...