Framery Q (UL) Meeting Maggie
4. If the turnable table top feels too stiff or too loose, adjust the M6x20 screw.
This only applies to the turnable table.
5. If installing a wide table, install the installation brackets under the table top to the walls
with 5x50 screws (1 pcs each).
Note: Make sure that the distance from the glass to the back edge of the table
top is equal over the entire width of the table. Measure the distance at the
center and the ends of the table top.
Note: Make sure that the table top is level. Use a spirit level.
100
Installation instructions
info@frameryacoustics.com
To Next Page
Loading...
