Framery Q (UL) Meeting Maggie
12.2 Install the table
1. Install the base of the table leg with M6x20 countersunk screws (6 pcs) and 5x50
screws (4 pcs).
Note: Make sure that the cords are not pinched or damaged during the
installation.
Note: If the optional wireless charger is included in the pod delivery, do not
fasten the table leg. The table leg is installed to the floor after installing the
power outlet (see section Install the power outlet on page 102.)
98
Installation instructions
info@frameryacoustics.com
To Next Page
Loading...
