Framery Q (UL) Meeting Maggie
3. Place the smaller part of the acoustic panel against the back edge of the floor.
4.3 Connect the floor modules
1. Lay the floor modules down at the intended final location.
Leave approximately 0.5 m (1.8 ft) of empty space behind the floor modules.
Note: If reinstalling the pod after relocation, there may be some scratches on
the black ABS strips. Make sure that the scratched sides are on the intended
front of the pod.
Note: Make sure that the small piece of acoustic panel is at the intended back
left of the pod.
Installation instructions
info@frameryacoustics.com
23
To Next Page
Loading...
