Framery Q - Install the cover panels and plates; Install cover panels and plates

Framery Q (UL) Meeting Maggie
10 Install the cover panels and plates
1. Install the roof cover plates (4 pcs) with 4x20 screws (1 pcs each).
Note: Place the countersunk holes upwards. Use the existing screw holes.
2. Install the floor cover plates (4 pcs) with 4x20 screws (1 pcs each).
Note: Place the countersunk holes upwards. Use the existing screw holes.
Installation instructions
info@frameryacoustics.com
73