Framery Q (UL) Meeting Maggie
2. Slide the threshold outwards against the door frame.
Note: Make sure that the side frame seals are not between the threshold and
the door frame. Neatly cut the side frame seal to the correct length, if needed.
Note: Make sure the side frame seals and the threshold seal do not overlap.
Neatly cut the threshold seal to the correct length, if needed.
Note: Make sure that the protective plastic on the aluminum frames is not
under the threshold. Peel back further, if needed.
3. Install the ceiling threshold with black 5x30 screws (4 pcs).
Installation instructions
info@frameryacoustics.com
113
To Next Page
Loading...
