Framery Q (UL) Meeting Maggie
2. Press the body cover into the upper groove with one hand and bend the body cover
lightly outward with your other hand. Slide the lower edge of the body cover into the
groove at the bottom of the wall and press the body cover into place.
3. Repeat steps 1 and 2 for the other wall body cover.
Note: Make sure that there are no gaps between the body covers and the
frames.
Note: Make sure that the wall body covers are installed evenly and aligned
correctly with the other body covers. Use a white rubber mallet to tap the wall
covers into alignment if needed.
Installation instructions
info@frameryacoustics.com
139
To Next Page
Loading...
