Framery Q - Page 88

To Next Page

To Previous Page

Framery Q (UL) Meeting Maggie

4. Connect the DC extension cord to the PWR IN connector.

5. Connect the nearest fan power cord to the FAN 1 connector.

Installation instructions

info@frameryacoustics.com

Main Page

Table of Contents3
Warranty Checklist7
Important Safety and Product Instructions8
Preface8
Product Information8
Copyright8
Manual Contents8
Intended Use8
Non-Conventional Use9
Ambient Conditions for Use9
Warning, Information, and Safety Symbols in this Manual9
Main Safety Risks Related to the Installation, Maintenance, Disassembly, and Use of the Product10
Installation, Maintenance, and Disassembly10
Electrical Safety10
Fire Safety11
Use12
Moving the Product on Casters (Optional)13
Location of Product Markings14
Installation Requirements17
Tools and Accessories17
Main Dimensions18
Installation Space18
Operating Space19
Seismic Anchoring Requirements20
Floor21
Install the Casters (Optional)21
Prepare the Acoustic Panel22
Connect the Floor Modules23
Level the Floor28
Install the Wall Modules30
Remove the Wall Cover Panels30
Connect the Wall Modules to the Floor31
Roof34
Connect the Roof Modules34
Install the Roof37
Front Frames and Glasses40
Install the Side Frames (Front)40
Install the Control Panel (Optional)44
Install the Front Glasses48
Install the Upper and Lower Frames53
Install the Booking System Bracket (Optional)55
Back Frames and Glasses63
Install the Side Frames (Back)63
Install the Lower Frame66
Install the Back Glasses67
Install the Upper Frame69
Install the Seals71
Install the Cover Panels and Plates73
Install the Electrical Equipment75
Install the Metal Box with Electrics75
Install the DC Extension Cord79
Install the LAN Cord (Optional)82
Power Unit83
Install the Power Unit83
Install the Floor Cover Board84
Install the Control Unit86
Install the Control Panel Cord89
Install the Motion Detector and Light91
Install the Interior95
Assemble the Table95
Install the Table98
Install the LAN Data Cartridge (Optional)101
Install the Power Outlet102
Install the Carpet and Floor Grid108
Install the Door110
Install the Floor Threshold110
Install the Ceiling Threshold112
Install the Door114
Install the Door Handle116
Install the Smart Lock Handle (Optional)119
Install the Coat Hooks131
Assemble the Seats132
Install the Body Covers133
Install the Roof Cover Panel133
Install the Bottom Body Covers134
Install the Roof Body Covers136
Install the Wall Body Covers138
Finish the Installation140
Moving the Pod (Optional)142

Framery Q - Page 88

Table of Contents

Other manuals for Framery Q

Related product manuals