9 | Cleaning Franke Kaffeemaschinen AG
50 User manual A1000
When the cleaning cycle is complete, the machine either switches back to the maintenance level or the
energy saving mode. Your service technician can set the desired option for you.
9.5 Cleaning the aerator
1. Remove the aerator for hot water with the
tool and descale.
2. Screw the aerator back in.
9.6 Weekly cleaning
Clean the machine components listed in this chapter at least once a week, in addition to the daily cleaning
process. Clean the machine immediately if you notice any soiling.
9.6.1 Cleaning the machine surface
1. Clean the surface of the machine with a
damp cloth.
2. If necessary, use a mild cleaner. NOTICE!Do
not use abrasive cleaners.
9.6.2 Cleaning the bean hopper and powder hopper
CAUTION
Formation of mold
Moisture within the bean hopper may lead to the growth of mildew.
a) Do not bring the bean hopper into direct contact with water.
b) Use only a damp cloth for cleaning.
c) Ensure that the bean hopper is completely dry before attaching it.
CAUTION
Cutting injuries/crushing
The powder hoppers worm gear mechanism can cause cuts or crushing injuries.
a) Exercise care when cleaning the powder hopper.
To Next Page
Loading...
Need help?
General
