28 User manual A300 Franke Kaffeemaschinen AG Installation | 6
Risk of fatal injury from electrocution
Work improperly performed on electrical systems can lead to electrocution.
a) Trained and qualified electricians are permitted to work on electrical systems. Instructed persons are permitted to work
on electrical systems only under the guidance and supervision of a trained and qualified electrician.
Risk of fatal injury from electrocution
Damaged power cords, pipes or push-on fittings can lead to electrocution.
a) Do not connect any damaged power cords, pipes or push-on fittings to the power grid.
b) Replace damaged power cords, pipes or push-on fittings.
If the power cord is permanently assembled, contact the service technician. If the power cord is not permanently assembled,
order and use a new, original power cord.
c) Ensure that the machine and the power cord are not near any hot surfaces such as gas or electric stoves or ovens.
d) Ensure that the power cord is not pinched and does not chafe on sharp edges.
1. Fuse the electrical circuit. 2. Connect each device to the power grid sepa-
rately.
3. Activate the electrical circuit.
6.8 Switching the machine on
The machine starts.
1. Briefly press the button [1].
To Next Page
Loading...
