9 | Filling and emptying Franke Kaffeemaschinen AG
54 User manual A300
5. Lift up the powder hopper and remove it.
6. Empty the powder hopper.
7. After replacing the empty powder hopper, push in
the locking slide.
8. Close the door.
If the powder hopper is not locked correctly, this may
impair both the operation of the coffee machine and the
product quality.
a) Push the locking slide all the way in.
9.10 Emptying the cooling unit
Health hazard due to germ formation
Inadequate cleaning can result in food residues accumulating in the machine and at the outlets, thereby
contaminating products.
a) Do not use the machine unless it has been cleaned according to the instructions.
b) Clean the machine daily in accordance with the instructions.
c) Inform operating personnel of the necessary cleaning measures.
Spoiled milk
Insufficient cooling or hygiene can cause milk to spoil.
a) Only use pre-cooled milk (2.0−5.0 °C).
b) Only store milk in the cooling unit when the cooling unit is in operation. Outside operating hours, e.g.
overnight, store the milk in a cooling unit.
c) Clean the machine and cooling unit once a day.
d) Only touch the suction hose, the inside of the milk container, and the milk lid after sanitizing your hands, or
wear single use gloves.
e) Place the container lid with the suction hose on a clean surface only.
Blockage in the milk system
Fibers from unsuitable cleaning cloths can enter the system and cause a blockage. This can damage the machine.
a) Use a microfiber cloth to clean the milk container.
To Next Page
Loading...
