Franke A300 - Technical Data; Capacities in Accordance with DIN 18873-2:2016-02

| Franke Kaffeemaschinen AG
72 User manual A300
Coffee is old
Use fresh coffee
Bean hopper not locked correctly
Check the bean hopper locking mechanism
Filling beans [ 39]
Coffee tastes strange
Poor grind
Contact customer service
Minimal coffee usage
Pour a small amount of coffee beans into
the bean hopper
Spoiled coffee beans
Replace coffee beans
Cleaner residue
Rinse the machine
Dirty cup
Check the dishwasher
Poor water quality (chlorine, hardness,
etc.)
Have the water quality checked Water
quality [ 24]
Coffee tastes bitter
Temperature too high
Lower the coffee temperature Setting
drinks [ 33]
13 Troubleshooting
Problem
Possible causes
Possible remedy
Grind too fine
Select a coarser grind Setting the grind
coarseness
Coffee quantity too low
Increase the amount of coffee Setting
drinks [ 33]
Roast too dark
Use lighter coffee roast
Coffee tastes sour
Temperature too low
Increase the coffee temperature Setting
drinks [ 33]
Roast too light
Use darker coffee roast
Grind too coarse
Select a finer grind Setting the grind
coarseness
Consistency of powder
products
Viscous
Use less powder, use more water
Watery
Use more powder, use less water
Powder clumping or moist
Clean and dry powder system
Taste of powder products
Too sweet
Use less powder, use more water
Not sweet enough
Use more powder, use less water
Strange taste
Clean powder system
Technical data 14
14 TECHNICAL DATA
14.1 Capacities in accordance with DIN 18873-2:2016-02
This data assumes a mains voltage of 230 V.