Franke A300 - Page 43

Water settings
Water supply settings
Parameter Value range
Remarks
Water filter active – Yes
– No
– Yes: •Slide control appears for entering the
duration of use/the water quantity for the water
filter (depending on the filter used) –
No: Set water hardness
38 User manual A300 Franke Kaffeemaschinen AG Configuration | 8
Water hardness
Hardness levels 1 - 5
Use the slide control to set the measured water
hardness Determining the water hardness with a
measuring strip [ 25]
The water hardness must be set on machines that
have a water tank and machines that are connected to
the mains water supply but have no water filter
Factory settings
Action
Service technician
Owner
Specialist
Operator
Change PIN and acti- Yes (for all roles)
vate test products
Yes (for lower-level
roles)
No
No
Add/change/re- Yes move/adapt
products
Yes (reduced scope)
No
No