Franke A300 - Replacing the Brewing Unit

Franke Kaffeemaschinen AG Cleaning | 11
1. Empty the machine and disconnect it from the
mains power supply.
5. Take out the brewing module by pulling it forwards.
6. Insert the new brewing module.
7. Fasten the brewing module locking mechanism in the clockwise direction.
8. Close the machine's door.
9. Place the grounds container back into the machine.
10. Connect the machine to the mains power supply.
2.
Remove the grounds container from the
machine.
4.
Release the brewing module lock in counterclockwise
direction.