Franke SB1200 - Page 39

Franke Kaffeemaschinen AG Filling and emptying | 7
User manual SB1200 39
7.4.2 UT40 cooling unit
NOTICE
Damage or breakage of grate
If the maximum load capacity of the grate in the cooling unit is exceeded, this can lead to damage or
breakage.
a) Ensure that the maximum load capacity of the grate (22kg) is not exceeded.
1. Open the cooling unit door.
2. Switch on the cooling unit.
ð The current cooling chamber temperature
is displayed.
3. Disconnect the plug-in coupling from the
container and connect it to the pump mod-
ule.
4. Pull out the container.
5. Remove the container lid.
6. Fill the container with cooled milk or a cooled
liquid.
7. Fit the container lid on the container.
8. Connect the plug-in coupling to the con-
tainer.
9. Slide the container all the way into the cool-
ing chamber.
10. Close the cooling unit door.