7 | Filling and emptying Franke Kaffeemaschinen AG
46 User manual SB1200
2. Remove the container.
3. Store the milk or the medium in a refrigerator
or dispose of if necessary.
4. Clean the container, lid, reversible adapter,
suction hoses and cooling chamber.
5. Fit the container lid to the container using the
reversible adapters.
6. Slide the cleaned container all the way into
the cooling chamber.
7. Switch off the cooling unit if it is no longer re-
quired. Leave the door to the switched-off
cooling unit slightly open in order to prevent
the formation of odors.
7.11.2 UT40 cooling unit
1. Open the door.
2. Disconnect the plug-in coupling(s) from the
container(s).
3. Connect the plug-in coupling(s) to the pump
module(s).
4. Pull out the container.
To Next Page
Loading...
