Franke Kaffeemaschinen AG Cleaning | 9
User manual SB1200 53
10:54
2020-03-02
Clean system
Clean system and FSU/Clean
Flavor Station
Rinse coffee machine
Prepare cold media
Prepare Flavor Station
Filter water quantity
Wipe protection
Error/event log
Cleaning and maintenance
6. Select Clean system.
7. Confirm message with Yes to begin the
cleaning process.
8. Follow the instructions on the user interface
and confirm the completed steps by select-
ing Next.
ð The machine shows the next step.
9. After completing the automatic cleaning
process, wipe the all-in-one spout with a pa-
per towel.
9.4.2 Start cleaning for cooling unit SU12 CM
1. Open the door.
2. Pull the milk container forwards.
3. Pull the reversible adapter upwards and from
the suction fitting.
4. Turn the reversible adapter 180°.
5. Place the reversible adapter onto the suction
fitting.
6. Slide the milk container all the way in.
7. Set the switch to the cleaning position.
ð The machine switches automatically to the
cleaning mode.
8. Close the door.
9. Start the cleaning process by selecting Yes
on the operator panel.
10. Follow the instructions on the user interface
and confirm by pressing Next.
ð The machine guides you to the next step.
To Next Page
Loading...
