EasyManua.ls Logo

Frecon PV100-2S-2.2B - Page 36

Default Icon
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PV series Solar Pumping Inverter
- 36 -
Err13:Fault protection of
external input
Err14:Overheat
Err15:Memory Failure
Err16:Cancel Auto-tuning
Err17:Auto-tuning Failure
Err18:485 Communication
Timeout
Err19:PID feedback
disconnection on runtime
Err20:running time arrives
Err21:Parameter Upload Error
Err22:Parameter Download
Error
Err23:Braking Unit Failure
Err24:Disconnection fault of
temperature sensor
Err25:Lose-load failure/alarm of
Inverter
Err26:with-wave current limit
fault
Err27:Soft-start relay unclosed
Err28:EEPROM Version
Incompatible
Err29:Overcurrent tested by
hardware
Err30:Overvoltage tested by
hardware
Err32: Hydraulic Probe Failure
Arn33:Pre-warning of weak light
Arn34:Pre-warning of full-water
U01.01
Output frequency of the
current fault
0.00~Fup
0.00Hz
⊙
U01.02
Output current of the
current fault
0.0~3000.0A
0.0A
⊙
U01.03
c of the current fault
0~1200V
0V
⊙
U01.04
Cumulative runtime of
the current fault
0~65535h
0h
⊙

Table of Contents