FTP Status
Enable/disable FTP function and port setting for FTP. The standard port for FTP is 21.
After making your changes, click on “Apply”.
NOTE: If you are using the Freecom Network Drive in a network and you
want to have FTP access on the Freecom Network Drive from the outside
(Internet), you have to forward the selected FTP port (e.g. 21) to the IP
address of your Freecom Network Drive!
Please consult the user manual of your router for further information
how to setup port forwardings!
Allow anonymous
Anonymous login allows the user to login as
User: anonymous Password: user’s e-mail address
Anonymous users will have access to only one folder on the Freecom Network Drive.
Enable/Disable Enable/disable anonymous user access.
Read only / Read/Write Specify if anonymous user has read-only or
read/write access.
Home Directory Specify the folder for the anonymous user, this
folder will be accessed by anonymous login.
Please click on “Apply” to save your settings.
User Account List
In the “Account List”, you can add or delete users and modify their access rights.
Add
Click on “Add” to add a new user. Enter a user name and a password and click on “Ap-
ply”.
To Next Page
Loading...
