Control methods：
Click/Tap the OUT/IN button to change GPIO direction.
Click/Tap pins to change the GPIO output state.
Completed
According to the circuit we build, set GPIO17 to OUT, then click Header11 to control the LED.
About WebIOPi
The reason for changing file in the configuration process is that the model of new generation of RPi CPU is
different form old one, which result in some of the issues during using.
WebIOPi has not provide corresponding installation package for latest RPi timely. Therefore, there are two
changes in the configuration, and some BUG may exist to cause some problems to WebIOPi function. We
look forward to that the author of WebIOPi to provide a complete set of the latest version of installation
package to fit with RPi. WebIOPi can achieve far more than this, so we also look forward to learning and
exploring with the funs.
To Next Page
Loading...
Need help?
General