LUM0024AB Rev A
Appendix C: Using the Discovery Server
You can use the FreeWave Discovery Server to determine and set a transceiver's IP address and other
Ethernet communication settings. The Discovery Server is a free utility available from FreeWave and is
available on the User Manual and System Tools CD and is also available for download from
www.freewave.com.
When you open the Discovery Server application, it automatically attempts to discover any Plus-style
transceivers connected via Ethernet. The transceivers broadcast this information, so they should be
successfully discovered as long as they have a physical Ethernet connection to the network or are able to
communicate back through their Gateway.
115
To Next Page
Loading...
