FreeWave FGR2-PE - Chapter 9: Data Communication Link Examples

User Manual and Reference Guide
LUM0024AB Rev A
neither sent via the Ethernet port, nor via the radio link.
RADIUS IP Address
Note: This option is controlled from the Gateway only. It has no functionality on
Endpoints or MultiPoint Repeaters.
Web Parameter: RADIUSIPAddress in the RADIUSAuthentication Configuration section of
the Security page.
Network Type: Both
Default Setting: 0.0.0.0
Options: Any valid IPaddress.
Description: The IP address of the RADIUS server. DNS names are not accepted.
RADIUS Port
Note: This option is controlled from the Gateway only. It has no functionality on
Endpoints or MultiPoint Repeaters.
Web Parameter: RADIUSPort Number in the RADIUSAuthentication Configuration section
of the Security page.
Network Type: Both
Default Setting: 1812
Options: Any valid port number between 0 and 65535.
Description: The port number of the RADIUS server’s authentication port. By default, the
port number is set to 1812.
Shared Secret
Note: This option is used on Endpoints and MultiPoint Repeaters only. It has no
functionality on Gateways.
Web Parameter: Shared Secret in the RADIUS AuthenticationConfiguration section of the
Security page.
Network Type: Both
Default Setting: Blank
Options: Any free form text.
Description: The secret for the RADIUS server. The IP address of the transceiver should
be entered in the RADIUS server’s “Clients” file. Each transceiver acts as a
client when accessing the RADIUS server for authentication.
User Password
Note: This option is used on Endpoints and MultiPoint Repeaters only. It has no
functionality on Gateways.
Web Parameter: User-Password in the RADIUS AuthenticationConfiguration section of the
75