freightliner M2 Plus 2023 - Lytx SF500 Drivecam System

•
lane departure warning system disabled
•
distance/tailgate alert given
•
forward collision warning
•
collision mitigation braking
•
automatic traction control (ATC) activation
•
antilock braking system activation
•
stability system activation
•
excessive braking
•
excessive speed on curves
•
average following distance
•
adaptive cruise control usage
Lytx SF500 DriveCam System
Driver Facing Camera
WARNING
The Lytx DriveCam event recorder is a driver aid
only. It is not a substitute for a safe,
conscientious driver. It cannot compensate for a
driver that is distracted, inattentive, or impaired
by fatigue, drugs, or alcohol. Whether or not the
Lytx DriveCam event recorder is in use, it is
always the responsibility of the driver to take
appropriate corrective action. Never wait for the
Lytx DriveCam event recorder to provide a
warning or audible alert before taking measures
to avoid an accident. Failure to do so can result
in severe property damage, serious personal
injury or death.
The Lytx SF500 DriveCam System constantly
monitors driving behaviors. When risky driving
behavior is detected it begins a recording, indicated
by a red light in the camera. An audible alert sounds
to alert the driver. The alerts can not be muted and
continue to occur until the driver corrects the
behavior.
Risky driving behaviors that may be monitored
include:
•
Driver Smoking
•
Food or Drink
•
Handheld Device
•
Inattentive or Distracted Driver
•
No Seat Belt
•
Speed (company policy)
•
Speed (posted speed)
•
Following Distance
•
Lane Departure
Vehicles equipped with a Lytx SF500 driver facing
camera have a switch on the dash as shown in
7.14.
Press the VIDEO REC switch to manually initiate a
ten-second recording. An amber lamp in the switch
illuminates while the recording is in process.
The Lytx SF500 DriveCam System automatically
turns on a privacy mode when the parking brake is
set. When the vehicle is on, it is indicated by a solid
blue LED light on the Lytx camera. This mode cannot
be initiated by the driver.
Videos can be viewed on the Lytx account system
which requires approval to access.
For more information, access the Lytx SF500
DriveCam System User’s Manual by scanning the
Lytx QR code shown in
Fig. 7.15.
f61207712/ 9/20212
VIDEO
REC
Fig. 7.14, Lytx Video Record Switch
f54783005/12/2022
Fig. 7.15, Lytx QR Code Link to Manual
Driver Assistance Features
7.8