Warnings, Indicators, and Messages
Engine System
Telltale Color Description Related Messages
Amber Check Engine
*
Indicates an engine condition (low oil pressure,
low coolant level, high coolant temperature,
high DPF soot level, uncontrolled DPF
regeneration, or battery voltage 11.9 volts or
less) that requires correction.
Correct the condition as soon as possible.
If the condition worsens, the STOP engine
lamp will illuminate.
Various
Amber
Engine Malfunction
Indicator Lamp
(MIL)
*
A steadily illuminated amber MIL lamp
indicates an engine fault that effects emissions.
Amber
Engine Malfunction
Indicator Lamp
(MIL)
*
Alternate Engine Malfunction Indicator lamp.
A steadily illuminated amber MIL lamp
indicates an engine fault that effects emissions.
Amber
Engine Oil Level
Caution
Amber
Engine Oil
Pressure Caution
Amber
Low Coolant Level
Caution
Amber
High Coolant
Temperature
Caution
Amber Start Blocked
Indicates that the system is preventing the
starter from cranking. This can occur when the
ignition switch is turned to START before the
gauge sweep has completed.
NOTE: Display of the Start Blocked screen
does not indicate a problem with the starter.
Turn the ignition switch back to ON, wait for
the message to turn off, then turn the ignition
switch to START again.
04/22/2016
f611369
ICUC Notice
Amber Start Blocked Alternative Telltale for Start Blocked.
Green Start Engine
Instruments
3.26
To Next Page
Loading...
