Attention!
High voltage inside; danger of electrocution.
This plate is applied on the cover of the electrical box
and warns the operator that it must not be removed
for any reason whatsoever, thus avoiding the danger
of electrocution which could be fatal. In this case as
well, maintenance of internal components is reserved
for qualified personnel.
Attention!
Moving parts, danger of shearing limbs.
This plate is applied on the front panel, near the door
and warns the operator that there are moving parts
during operation. Do not tamper with the grids and
safety systems in any way. In case of tampering, do
not use the machine, disconnect the power supply
and contact technical assistance.
Do not try to insert fingers or other foreign bodies into
the safety grids: risk of shearing or damage to things
and persons.
To Next Page
Loading...
