Connecting FRITZ!Box Fon to a Network Hub
FRITZ!Box Fon – 2 Starting FRITZ!Box Fon Operation 21
Connecting FRITZ!Box Fon to a Network Hub
1. Connect FRITZ!Box Fon to the mains power supply and
to DSL as described on page 14.
2. Connect one end of the red LAN cable to the uplink port
of the network hub or switch.
3. Connect the other end of the LAN cable to the socket on
FRITZ!Box Fon labeled “LAN”.
Connecting FRITZ!Box Fon to a network hub
You can only connect to the Internet if Internet access is con-
figured on the computer. See the section “Basic Configura-
tion of FRITZ!Box Fon” from page 28 for information about
how to configure an Internet connection.
FRITZ!Box_Fon-e.book Seite 21 Donnerstag, 4. November 2004 2:08 14
To Next Page
Loading...
