Configuring FRITZ!Box Fon
FRITZ!Box Fon – 3 Configuring FRITZ!Box Fon 31
3 Configuring FRITZ!Box Fon
The first time FRITZ!Box Fon is configured, it is ready for oper-
ation and can be used for Internet connections, Internet
telephony and fixed-line telephone calls. If you would like to
make settings to FRITZ!Box Fon that go beyond this basic
configuration, open the FRITZ!Box window and work through
the following steps:
z Start your web browser.
z Enter the address “fritz.box” or “192.168.178.1”.
3.1 Going Online with FRITZ!Box Fon
After the basic configuration of FRITZ!Box Fon no further set-
tings are necessary for Internet connections, and there is no
need to install additional Internet access software. All con-
nected computers can start a web browser at any time and
surf the Net.
When you surf with FRITZ!Box Fon, all connected computers
are protected from unauthorized access from the Internet.
FRITZ!Box Fon indicates each active Internet connection on
the “DSL” LED.
Note that FRITZ!Box Fon automatically assigns IP addresses
to all computers that are supposed to use this Internet ac-
cess. For information on this topic, see the “Guidebook”
from page 48.
Settings for Internet Connections
The basic configuration of FRITZ!Box Fon includes all settings
required for Internet access. Further settings and monitoring
options are available in the FRITZ!Box window. These options
allow you to configure FRITZ!Box Fon according to your
needs.
FRITZ!Box_Fon-e.book Seite 31 Donnerstag, 4. November 2004 2:08 14
To Next Page
Loading...
Need help?
General
