Removing FRITZ!Box Fon
FRITZ!Box Fon – 5 Removing FRITZ!Box Fon 45
5 Removing FRITZ!Box Fon
Follow the instructions below to remove FRITZ!Box Fon:
If FRITZ!Box Fon is connected to the computer’s LAN port or to a
network hub, all you need to do is remove the network cable.
If FRITZ!Box Fon was installed at the computer’s USB port,
proceed as described in the following sections.
5.1 Uninstallation in Windows XP
Note that FRITZ!Box Fon can only be removed while it is con-
nected to the computer’s USB port.
Proceed as follows to remove the FRITZ!Box Fon driver soft-
ware in Windows XP:
1. Open the Windows System properties by clicking
through “start / Control Panel / Performance and Main-
tenance / System / Hardware / Device Manager”.
2. Click the “Device Manager” button on the “Hardware”
settings page.
3. In the “Network adapters” section of the Device Manag-
er, select the “AVM FRITZ!Box Fon” entry.
4. In the “Action” menu, select the “Uninstall” command.
5. Confirm the uninstallation in the following security
prompt. FRITZ!Box Fon will be removed.
This completes uninstallation of the driver software.
Proceed as follows to remove the FRITZ!DSL software package:
1. Open “start / Control Panel / Add or Remove Programs”.
Make sure that the “Change or Remove Programs” but-
ton is selected in the column to the left.
2. Select the “AVM FRITZ!DSL” entry from the list of “Cur-
rently installed programs”.
3. Click the “Change/Remove” button.
This concludes the removal of FRITZ!DSL.
FRITZ!Box_Fon-e.book Seite 45 Donnerstag, 4. November 2004 2:08 14
To Next Page
Loading...
Need help?
General
