Operation Requirements
FRITZ!Box Fon – 1 This Is FRITZ!Box Fon 9
1.2 Operation Requirements
In order to operate FRITZ!Box Fon, you must have the following:
z an ISDN point-to-multipoint line in accordance with the
Euro ISDN protocol DSS1, or an analog telephone line
z one DSL Line: Standard ITU G.992.1 Annex A or Annex B
(depending on hardware model)
z
If you want to connect FRITZ!Box Fon over the computer’s
LAN interface, a computer with the following specifica-
tions is required:
– LAN port (standard network adapter Ethernet 10/100
Base-T), game console or other devices that support
a network
– To connect additional computers or a network, you
also need an Ethernet hub or switch.
z
If you want to connect FRITZ!Box Fon over the computer’s
USB port, a computer with the following specifications is
required:
– USB port (USB version 1.1 or 2.0), hard drive and CD
drive
– Operating system: Microsoft Windows XP,
Windows Me, Windows 2000, Windows 98, Linux
(from SUSE 9.0 upwards) or Mac OS X (from version
10.3.3 upwards)
z To install the DSL software FRITZ!DSL, the minimum
computer requirements are:
– 300 MHz Pentium II processor with Windows XP,
2000, Me or 98 and CD drive
– 32 MB RAM
– 20 MB free memory on the hard drive
FRITZ!Box_Fon-e.book Seite 9 Donnerstag, 4. November 2004 2:08 14
To Next Page
Loading...
Need help?
General
