Fritz!Box Fon User Manual

Connecting the USB Cable
FRITZ!Box Fon – 2 Starting FRITZ!Box Fon Operation 23
Connecting FRITZ!Box Fon to the USB port of a computer
4. Pick up the USB cable and plug the flat connector into a
free USB port on your computer.
5. Then plug the square connector into the socket labeled
“” on FRITZ!Box Fon.
FRITZ!Box Fon and your computer are now connected
over the USB cable.
6. Continue with installation as described in the following
sections. Select the section that describes the next
steps for the operating system installed on your com-
puter.
In some Windows operating systems the display of menus
and folders can be changed. The following instructions are
based on the standard installation of each operating system.
FRITZ!Box_Fon-e.book Seite 23 Donnerstag, 4. November 2004 2:08 14

Fritz!Box Fon Specifications

General

Brand	AVM
Model	Fritz!Box Fon
WLAN Speed	54 Mbps
Telephony	Yes
USB Ports	1
VoIP Support	Yes
Firewall	Yes
VPN Support	Yes
Type	Router
DSL Standard	ADSL/ADSL2+
WLAN Standard	802.11g