To Next PageTo Next Page
Need help?Do you have a question about the Fromm AP100 and is the answer not in the manual?
General| Brand | Fromm |
|---|---|
| Model | AP100 |
| Category | Industrial Electrical |
| Language | English |
Details warnings and prohibited action decals placed on the machine and its accessories.
Describes fixed guards preventing access to hazardous areas and machine operation restrictions.
Checks required before machine operation, including environmental and lighting conditions.
Specifies operating temperature range and protection requirements for outdoor storage.
Defines the minimum required illumination level for the work area.
Procedure for powering on the machine and initial display status.
Methods for stopping the machine, including normal shutdown and alarm conditions.
Details the process for shutting down the machine, including emergency shutdown.
Steps for loading the film roll and threading it through the machine's guide.
Instructions for feeding the film through the machine's rollers.
Procedure for guiding the film through the machine's housing.
Process for choosing and setting the desired operating program.
Setting the desired length of pillows to be produced by the machine.
Instructions for increasing or decreasing the machine's feed speed.
Guidance on adjusting fan speed for optimal air pillow filling.
Procedure for adjusting heat-sealing power for proper pillow sealing.
Details the required qualifications and training for maintenance personnel.
Recommendations for maintenance verification types and their frequency.
