4
Copying all or part of this manual in any way or form is strictly prohibited without written permission from its author © 2015
website: www.fromm-pack.com
1 GENERAL
• This machine was designed and built to produce air pillows for packaging using pre-sealed and pre-perforated 20-35
micron PE/PE and PE/PA folded film from FROMM. The use of this machine is reserved for professional operators
who have received appropriate instructions and training.
• This manual is to be used exclusively with the AP100 machine, designed to produce air pillows (Airpad).
• For safety reasons, this entire Instruction Manual must be read before installing or operating the machine, making
repairs or performing maintenance.
• In particular, please carefully read the SAFETY INSTRUCTIONS section, which presents the intended use of the
machine and the hazardous situations that could not be avoided when designing and manufacturing this machine.
• Tampering with the machine or using incompatible products (corrosive or flammable) is prohibited.
• Warranty coverage is valid if the machine is used exclusively for the purpose for which it was designed,
manufactured and protected. Please read the recommendations and information, including general questions,
regarding health and safety requirements, as well as the technical information provided by the Manufacturer to the
User regarding the machine’s use and operation.
• The warranty will not apply if the spare parts used are not original spare parts.
• Inappropriate use of the machine, including use that exceeds operating limits and modification of the machine or
parts thereof releases the manufacturer from any and all liability for personal injury or property damage.
For questions regarding any of the aforementioned, we recommend that our customers contact Customer Service.
2 DECLARATION OF CONFORMITY
Declaration of conformity
pursuant to EC Directives
We certify that the AP100 machine complies with the provisions of Directives 2006/42/EG, 2006/95/EG, 2004/108/EG
The following harmonized standards, national standards and normative documents are applicable:
UNI EN 12100-1/2:2005 + A 1:2009
ISO 13849-1:2008 + AC:2009
CEI EN 60204-1:2006
EN ISO 14121:2007
Technical design file from:
Fromm Italiana s.r.l.
Viale del Lavoro, 21
37013 Caprino Veronese (VR) –
ITALY
20.04.2015
R.Fromm
Administrator
FROMM Holding AG
Hinterbergstrasse 26
CH - 6330 Cham - Switzerland
To Next Page
Loading...