Fromm AP100 - Loading the film on the rollers

17
Copying all or part of this manual in any way or form is strictly prohibited without written permission from its author © 2015
website: www.fromm-pack.com
21.4.3
Make sure that the roll is fully inside the containing flanges.
21.4.4
If there is no opening, cut the corner of the film on the open
channel end.
21.5 Loading the film on the rollers
21.5.1
For a right-feed roll, feed the film through the rollers with
the inside on the upper roller and the outside touching the
lower roller.
21.5.2
For a left-feed roll, feed the film around the outside of the
lower roller.
Open channel
end