Fromm AP100 - Verification type and frequency; MAINTENANCE OPERATIONS THAT MUST BE PERFORMED EXCLUSIVELY BY QUALIFIED PERSONNEL; DECOMMISSIONING

25
Copying all or part of this manual in any way or form is strictly prohibited without written permission from its author © 2015
website: www.fromm-pack.com
- machine theory and function;
- assistance from manufacturer technicians for first startup;
Training duration and the degree of technician preparation must be agreed and verified jointly by the Manufacturer
and the Customer, according to the various situations encountered.
26.1 Verification type and frequency
For supplementary maintenance, we recommend contacting FROMM AIRPAD AG.
When the machine is used correctly and under the proper conditions, it generally does not require being overhauled.
Contact FROMM AIRPAD AG Technical Support should any anomalies appear.
26.1.1 Daily maintenance
- Clean the machine at the end of each shift if the machine operates in a dusty environment
- Do not use flammable liquids to clean the machine.
26.1.2 Quarterly maintenance
Check the condition of the electrical equipment and assess its reliability for the time interval until the next maintenance
inspection.
26.1.3 Yearly or supplementary maintenance
After one year of operation, certain highly-used components in the production cycle may need to be replaced or
overhauled. Depending on the exceptional character of these operations, the customer may decide to:
- Replace these components by ordering original spare parts (customer is responsible in the event of incorrect
installation)
- Request on-site assistance from a technician, for more complex or extensive operations.
- Send the machine to the manufacturer for a complete overhaul.
Note: if the customer decides to personally replace components, it must use a qualified technician able to perform the
necessary operations. The Manufacturer declines all responsibility for supplementary operations performed by the
unauthorized personnel, which might lead to malfunction and/or damage and/or production that does not comply with
standards.
27 MAINTENANCE OPERATIONS THAT MUST BE PERFORMED
EXCLUSIVELY BY QUALIFIED PERSONNEL
All operations performed to correct an anomaly must be performed by FROMM AIRPAD AG Technical Service.
All preventive maintenance or breakdown repair operations not described in this manual must be performed by
employees of FROMM AIRPAD AG or by previously authorized personnel.
CAUTION:
Failure to follow these instructions shall immediately void all contractually-agreed warranty coverage.
28 DECOMMISSIONING
MACHINE DECOMMISSIONING
Before definitively decommissioning the machine, and before disassembly:
- Disconnect the machine from all power sources;
- Disconnect the machine from material loading devices.