12
Copying all or part of this manual in any way or form is strictly prohibited without written permission from its author © 2015
website: www.fromm-pack.com
16 MACHINE INSTALLATION
Assemble the machine before positioning it in the area in which it will be operated:
-insert the roll holder arm ( A in the drawing) and secure it with screws ( B in the drawing);
-loosen and remove the screws ( F in the drawing), and remove the footed arm ( D in the drawing) then insert the
screws in their new position and secure the arm in the fully extended position;
-insert the rollers ( C in the drawing), and secure them with hexagon socket head screws ( E in the drawing);
The machine features adjustable feet, and may be wheeled using the trolley provided by FROMM. Otherwise, it must
be positioned on a flat, level and sufficiently resistant surface using the appropriate resistance, ensuring that
the retractable footed support bar is fixed in its external position ( D in the drawing) . The machine must have a
suitable container to collect the air pillows produced, or the abovementioned basket.
17 VERIFICATIONS TO BE PERFORMED BEFORE STARTING THE MACHINE
Before starting the machine, ensure that no parts have been left on any part of the machine.
17.1 Environmental conditions
The machine may operate at temperatures between +5°C and +30°C.
The machine must not be started if exposed to poor weather conditions; in addition, if the machine
is stored, even temporarily, outdoors, it must be suitably protected from the environment.
17.2 Lighting conditions
The work area must be sufficiently lit, with a minimum value of 500 lx.
To Next Page
Loading...