26
Copying all or part of this manual in any way or form is strictly prohibited without written permission from its author © 2015
website: www.fromm-pack.com
DISASSEMBLY AND DISMANTLING
Once decommissioning operations have been completed, the various parts of the machine may be disassembled.
DISPOSAL
After the individual components have been removed, sort them according to material.
Metals: frame, connectors etc.
Aluminum;
Plastics: seals, cables etc.
Electrical material.
During disposal, recover components that may be recovered for re-use.
AFTER SORTING, ALL MACHINE COMPONENTS MUST BE DISPOSED OF BY
SPECIALIZED COMPANIES THAT WORK IN ACCORDANCE WITH LAWS THAT ARE
APPLICABLE IN THE COUNTRY OF USE.
29 INSTRUCTIONS FOR EMERGENCY SITUATIONS
TYPE OF FIRE EXTINGUISHING SYSTEMS TO USE
The machine consists almost entirely of metal materials. For this reason, there is not a significant risk of fire. However,
should such an event occur, proceed as follows:
- Disconnect the power supply using the power cutoff switch on the rear of the machine.
- Extinguish the fire using dry chemical powder or CO
2
fire extinguishers.
To Previous Page
Loading...