13
Copying all or part of this manual in any way or form is strictly prohibited without written permission from its author © 2015
website: www.fromm-pack.com
18 POWER CONNECTION
CAUTION - RISK OF ELECTROCUTION
The machine is prepared for electrical connection using a male/female power plug, and the cable supplied allows it to
be connected to the electrical mains using a Schuko plug (EC 7/7).
The power socket to which the machine will be connected must have a rated (max 10A) and differential (max 30mA)
circuit breaker installed upstream and coordinated with the User’s ground system.
In addition, upstream of the socket, a power supply cutoff switch must be installed.
The cable supplied is a multi-strand, flexible, PVC-insulated H05VV-F, which must be protected against abrasion and
cutting, and must be positioned such that it does not hinder the passage of people or things.
Caution
Before performing any operations, make sure that the mains voltage and frequency values correspond to
those on the machine's identification label. The Manufacturer shall not be held liable for machine connection
to electrical networks that do not correspond to the machine identification label. All electrical connections
must be performed by specialized personnel, and in full compliance with applicable norms.
19 INFORMATION REGARDING THE ELECTRICAL SYSTEM
The electrical equipment complies with the following standards:
• Low Voltage Directive 2006/95/EC
• Electromagnetic Compatibility Directive 2004/108/EC
• IEC/EN 60204-1 “Safety of machinery – Electrical equipment of machines”
• EC/EN 60439-1 “Low-voltage switchgear and controlgear assemblies (TTA)”
All components meet current market standards of approval.
• Do not have repairs performed by unqualified persons.
• Unauthorized persons must not use or make adjustments to the machine.
• Maintenance activities on the electrical system must be performed solely by qualified and authorized personnel.
20 CONTROL PANEL
To Next Page
Loading...