10
9OPERATION
9.1 Feeding the strap around the
package
The strapping is fed around the package in the
direction as shown in the illustration.
Important!
Use only plastic strap which is recommended by your
local sales representative (name and address on the
rear page of the operation manual).
Please only use sizes of strap which is intended for
your tool (see chart of types).
9.2 Inserting the strap
Pull up the grip lever firmly with your right hand.
Insert the two straps well aligned on each other into
the strap guide using your left hand.
Release the grip lever.
Always wear safety glasses
with side shields which
conform to ANSI Standard
Z87.1.
For Parts & Service 1-877-862-6699
To Next Page
Loading...
