108
LIGHT MODE
Initial setting for display illumination.
CASH
Sets the currency and charge rate for the
output energy to the grid
CO2
Setting of CO2 reduction factor
YIELD
Unit -
Setting range AUTO / ON / OFF
Factory setting AUTO
AUTO: The display illumination will stop 30 seconds after the last time
a key has been pressed.
ON: The display will remain illuminated whenever power is supplied
to the grid.
OFF: The display illumination will be permanently off.
IMPORTANT! The "LIGHT MODE" setting only relates to the display's background illumi-
nation. The LCD display will still remain on during operation. Its energy consumption is less
than one mW (1/1000 W).
Unit -
Display area Currency / Charge rate / kWh
Factory setting (depends on the country setting)
Unit kg/kWh, T/kWh
Setting range 00,01 - 99,99
Factory setting 0.59 kg/kWh
Setting
- an OFFSET value for the total energy
display
- a measurement correction value for
the Day, Year and Total energy dis-
play
To Next Page
Loading...
Need help?
General