94
Navigation in the Menu Level
Activating display
illumination
Press any key
The display illumination is activated.
If no key is pressed for 30 seconds, the display backlight goes out (provided that the
display illumination is set to automatic in the Setup menu).
The Setup menu also offers a choice between a permanently lit or permanently dark
display.
Automatic switch
to the "Now" dis-
play mode or the
startup phase
If no key is pressed for 2 minutes:
- While power is being fed into the grid, the inverter automatically switches to the "Now"
display mode and the present output power is displayed.
- If the inverter is not feeding power into the grid, the inverter automatically switches to
the startup phase for synchronization with the grid.
The inverter switches to the "Now" display mode or startup phase from anywhere with-
in the display modes or the Setup menu.
Accessing the
Menu Level
Press the "Menu" key (1)
1
(1)
1
To Next Page
Loading...
