Fronius IG Plus 100 V-1 User Manual

122
Setup Lock function
General The inverter comes equipped with the "Setup Lock" function.
When the "Setup Lock" function is active, the Setup menu cannot be accessed, e.g., to pro-
tect against setup data being changed by accident.
You must enter code 12321 to activate / deactivate the "Setup Lock" function.
Activating/deacti-
vating the "Setup
Lock" function
"Menu" is shown.
Select the "Setup" mode using the
"Left" or "Right" keys
Press the unoccupied "Esc" key 5 x
"CODE" is displayed, the first digit flashes.
Enter the access code 12321: Use the
"Up" and "Down" keys to select a value
for the first digit of the access code
Press the "Enter" key
The second digit flashes.
Repeat steps 4 and 5 for the second,
third, fourth and fifth digit of the access
code until ...
... the access code flashes.
Press the "Enter" key
Press the "Menu" key
1
2
3
4
5
6
7

Fronius IG Plus 100 V-1 Specifications

General

Brand	Fronius
Model	IG Plus 100 V-1
Category	Inverter
Language	English